http://www.macsat.com/macsat/components/com_openwiki/ 2009-01-09T23:25:53+01:00 http://www.macsat.com/macsat/components/com_openwiki/ http://www.macsat.com/macsat/components/com_openwiki/lib/images/favicon.ico text/html 2008-12-11T23:59:11+01:00 schufti http://www.macsat.com/macsat/component/option,com_openwiki/Itemid,66/id,dangerous_stuff/rev,1229036351/ Everything beyond this point may render your device useless. Do not try unless you are willing to open your NAS and learn how to build an JTAG interface. A word of advice: before doing anything that you haven’t done to a similar device befo... text/html 2008-11-23T16:35:16+01:00 ketelhuis http://www.macsat.com/macsat/component/option,com_openwiki/Itemid,66/id,building_the_firmware/rev,1227454516/ The source code is not currently available from all manufacturers at the moment, but all devices seem to be based upon a common source. I suspect that the board design is licensed from one of the manufacturers to the others. The fact that the source... text/html 2008-10-25T11:15:58+01:00 schufti http://www.macsat.com/macsat/component/option,com_openwiki/Itemid,66/id,flashing_with_a_new_firmware_image/rev,1224926158/ I wrote about “unlock” file in several threads; in reality it rebrands your box without telling you. So I disregard using it. If you want your device rebranded, do it willingly with the rebranding files in the repository (then you can us... text/html 2008-03-10T09:16:31+01:00 schufti http://www.macsat.com/macsat/component/option,com_openwiki/Itemid,66/id,downgrading_fw/rev,1205136991/ the newer fw versions V400C02 and higher has a different structure in the settings. If you just downgrade by flashing some lower version “upgrade file” via GUI, the older fw will choke on the new version settings and your box may not res... text/html 2008-03-10T09:09:03+01:00 schufti http://www.macsat.com/macsat/component/option,com_openwiki/Itemid,66/id,start/rev,1205136543/ The goal for this wiki is to create documentation and information on the developement process for alternative firmwares for the RDC R3210 based devices like the SMC EZ Connect Storage SMCWAPS-G, Micronica MGB100 Wi-Fi Hard Disk, Level One WAP-0007, ... text/html 2008-03-07T19:29:38+01:00 schufti http://www.macsat.com/macsat/component/option,com_openwiki/Itemid,66/id,braindead_by_design_-_the_gui-fw_update_and_recoveryloader/rev,1204914578/ apart from other design flaws and quick-n-dirty hacks of the implemented GPL tools, the GUI fw updater and the recovery loader are the best example for how not to do these things. The recovery loader doesn’t really deserve that name: For gett... text/html 2008-02-24T22:07:35+01:00 schufti http://www.macsat.com/macsat/component/option,com_openwiki/Itemid,66/id,rebranding_the_fw/rev,1203887255/ if there is no recent FW for your box, you can easily modify one from e.g. Ovislink/Airlive. All you need is a HexEditor. Original FW exists of five parts (BIOS, Rec.Loader, Kernel, RootFS, GUI). Each of these blocks is marked with a blockheader. In... text/html 2008-02-20T14:30:34+01:00 xitix http://www.macsat.com/macsat/component/option,com_openwiki/Itemid,66/id,printer_support/rev,1203514234/ End of the story → Only PCL5 and PCL6 printer are Supported. After my Support request, they edit the Productsheet on www.level-one.de, but not on http://global.level1.com/. This sucks! Am 12.04.2007, 11:07 Uhr, schrieb Support2 su&... text/html 2008-02-11T15:29:22+01:00 schufti http://www.macsat.com/macsat/component/option,com_openwiki/Itemid,66/id,building_other_applications/rev,1202740162/ Some programs are build for all cpu architectures within Linux - typically all of the i386 packages (e.g. rpms) will contain executables that you can copy across for use on these devices. If this does not work, you will need to get hold of the sourc... text/html 2008-01-09T14:27:05+01:00 firetwister http://www.macsat.com/macsat/component/option,com_openwiki/Itemid,66/id,about_jtag/rev,1199885225/ Jtag is working on the MGB100. See the_connector for hw & sw. For operating the RedBoot you’ll need the serial console too! due to jtag-tool problem you can’t flash whole image with jtag, so you flash RB and use it for flashing the ... text/html 2008-01-05T10:07:56+01:00 schufti http://www.macsat.com/macsat/component/option,com_openwiki/Itemid,66/id,recovery_from_bad_flash/rev,1199524076/ This hasn't been tested on all platforms, but definitely seems to work on most Thanks to Pagano for this. Download (and unzip into a root directory like C:\> ) appropriate firmware binary file .BIN from the homepage of the reseller of your bo... text/html 2007-10-10T08:26:38+01:00 preisl http://www.macsat.com/macsat/component/option,com_openwiki/Itemid,66/id,level_one_wap-0007/rev,1191997598/ Hallo zusammen, Hello folk, ich werde ein Step by Step Tutorial erstellen zum update der Firmware des WAP-0007 zu MGB100. i gona greate a step by step tutorial to update the firmware from Levelone WAP-0007 with MBG100. Screenshots1 Login to you... text/html 2007-10-09T17:23:48+01:00 firetwister http://www.macsat.com/macsat/component/option,com_openwiki/Itemid,66/id,apply_the_amit_hacks_to_busybox-1.7.2/rev,1191943428/ The amit company made some modifications to Busybox-1.0-rc2. The purpose of this modifications were: Set the hardware clock with the proprietary amit lib Include libamit in the build script Let the leds flash on shutdown Print CPU-usage for eve... text/html 2007-10-09T16:35:44+01:00 firetwister http://www.macsat.com/macsat/component/option,com_openwiki/Itemid,66/id,temporary_modifications_to_the_initrd/rev,1191940544/ This Page describes steps to make safe experiments with your NAS. As long as you don’t mess with /dev/mtd0 you probably won’t be able to screw your box Browse the initrd You have to create a partition on the harddisk, or usb-stick wit... text/html 2007-09-03T16:53:39+01:00 beachsun http://www.macsat.com/macsat/component/option,com_openwiki/Itemid,66/id,general_information_about_the_platform/rev,1188831219/ The devices are all based on the AMRISC 2000 ASIC which is most likely an customerspecific version of RDC R8610 CPU which is a RISC CPU emulating x486. According to the rdc.com.tw homepage it has the following specs and features: description Th... text/html 2007-08-02T09:14:11+01:00 macsat http://www.macsat.com/macsat/component/option,com_openwiki/Itemid,66/id,client_mode/rev,1186038851/ In the Forum, the user Aladinsane gave this explanation on getting Pagano’s V4 Upgrade with his OpenWrt Kamikaze image working in client mode : I had some trouble figuring that out as well. Here is what I’ve done. I disabled the dnsmasq... text/html 2007-06-11T09:59:46+01:00 Martin1802 http://www.macsat.com/macsat/component/option,com_openwiki/Itemid,66/id,connectec_mgb100/rev,1181548786/ I hope to share some informations about this little device ... I own a ASUS WLHDD 2.5" with Olegs firmware. But device comes to it's limitations ... only one usb1.1 host port, RAM only 16 MB and slower CPU ... looking for an 2.5" portable ... text/html 2007-06-10T10:45:08+01:00 Martin1802 http://www.macsat.com/macsat/component/option,com_openwiki/Itemid,66/id,list_of_compatible_hardware/rev,1181465108/ (This should be changed to a list with specifications like CPU, RAM, Wired interface, Wireless Interface, Bridge, USB connections, IDE Interface, Software Version where it works and so on). SMC EZ Connect Storage SMCWAPS-G Micronica MGB100 Wi-Fi ...