macsat.com OpenWrt and ASUS WL Forum
March 10, 2010, 06:40:24 AM *
Welcome, Guest. Please login or register.
Did you miss your activation email?
Login with username, password and session length
News: Back to macsat.com
 
   Home   Help Search Login Register  
macsat.com OpenWrt and ASUS WL Forum > SMC EZ Connect Storage (SMCWAPS-G), Micronica MGB100 Wi-Fi Hard Disk, Level One WAP-0007 and compatible > Firmware > accidentally upgraded :-( HELP
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: accidentally upgraded :-( HELP  (Read 336 times)
0 Members and 1 Guest are viewing this topic.
ozgurozan
Newbie
*
Offline Offline

Posts: 4


View Profile
« on: January 18, 2010, 21:56:34 PM »
Hi everyone.

first of all i'm sorry for my English.

i got a levelone wap-0007, today when i was browsing for new firmware i found R4.00b8 coded firmware from levelone's website. i upgraded succesfully. when i reach the console to set wireless AP, the console turned to black, and the download asisstant button was gone...  (the 02.jpg is the screenshot of new firmware)

before the upgrade my console was white-blue. and there was a download assistant button (which i can download from http, ftp and torrent with it). the screen is totally lookin' like that except BT download, there was a download assistant text. (01.jpeg i found this screenshot internet)


there are so many firmware link in the forum and i'm confused... which firmware i have 2 use. and do i have to follow any special steps.


Thanks...

* 01.jpg (90.34 KB, 1234x721 - viewed 29 times.)

* 2.jpg (77.07 KB, 1024x600 - viewed 28 times.)
Logged
Ernst
Full Member
***
Offline Offline

Posts: 112



View Profile
« Reply #1 on: January 18, 2010, 22:10:38 PM »
Well from the screenshots it is clear that you downgraded from Airlive branded R4.00c2 to Level One branded R4.00b8.

What made you think that b8 is newer than c2?

You must find the Airlive R4.00c2 (or newer) software and do an upgrade. The WMU-6000FS_R400C3.BIN file is on their website.

I hope it works since you changed the branding. If it doesn't work search for schufti's rebranding instructions in the wiki and rebrand the box to airlive before flashing it with airlive software.

 
Logged
ozgurozan
Newbie
*
Offline Offline

Posts: 4


View Profile
« Reply #2 on: January 18, 2010, 22:16:56 PM »
Thank you Ernst

the screenshot doesn't belongs to me... my firmware was something like "R400C3 11/14" as far as i rmmbr. thank you again.
Logged
ozgurozan
Newbie
*
Offline Offline

Posts: 4


View Profile
« Reply #3 on: January 18, 2010, 23:26:01 PM »
hi again to everyone.

i found the airlive's firmware, and i replaced the first few lines of bin files with hex editor (the hex thing written here    http://www.macsat.com/macsat/component/option,com_openwiki/Itemid,66/id,flashing_with_a_new_firmware_image/  )

when i select the new firmware and click upgrade the lights goes crazy and 10 second later there is a "unallowable firmware" error.  the device continues to works old firmware.

i searched the forum but nothing. :-(


is there any lock or something to not use hacked/different firmwares on the device...


Thanks.
Logged
schufti
Sr. Member
****
Offline Offline

Posts: 272



View Profile WWW
« Reply #4 on: January 21, 2010, 18:31:50 PM »
Hi!

you obviously DIDN'T read the forum, or you are very lazy on reading.

There are 100's of the posts about why one can't load diferen't FW, how/why NOT to modify it and how to get the latest&greatest FW on your box .....

Best bet on your situation is:
a) reset to factory default
b) download the gui.bin file for your level one
c) flash it via recovery loader
d) reboot and pray that box comes up again and password is ok (admin or airlive)
e) via the GUI (advanced/ FWupgrade) load the latest GPL firmware from the repository

schufti

don't bother to ask about details on step a-e, it's all in the wiki and/or the forum
Logged
I won't answer posts or PMs about repair/recovery after bad flash until proven that the wiki was read and followed!
find all my MGB100 files here, pass: mgb100
ozgurozan
Newbie
*
Offline Offline

Posts: 4


View Profile
« Reply #5 on: January 23, 2010, 19:50:41 PM »
i still didin't make it but thank you schufti.
Logged
schufti
Sr. Member
****
Offline Offline

Posts: 272



View Profile WWW
« Reply #6 on: January 23, 2010, 23:08:23 PM »
Hi,

see, you didn't even say what failed for you.
Usually, flashing the uc3gui.bin via recovery loader never fails ....

a) but we need a clean defined status of your box, so please try if you can still flash original LevelOne via the webinterface. Or if no, if you can flash original LevelOne via the recovery loader. -> c

b) If both fail, please download the rebranding files and flash the LevelOne.bin via recovery loader followed by the orig. LevelOne FW (without rebooting). Then reboot the box 2x. -> c

c) flash the uc3gui.bin via recovery loader. reboot 2x.
you should now be able to enter GUI to flash   MGB100_v4c3sq_091110.zip (you have to unzip first, ofcourse)

schufti
Logged
I won't answer posts or PMs about repair/recovery after bad flash until proven that the wiki was read and followed!
find all my MGB100 files here, pass: mgb100
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to:  

English Steel 1.6 © Saxon North Technologies
Powered by MySQL Powered by PHP Powered by SMF 1.1.10 | SMF © 2006-2009, Simple Machines LLC
Joomla Bridge by JoomlaHacks.com 		Valid XHTML 1.0! Valid CSS!
Page created in 0.037 seconds with 24 queries.