Hi All,
I have a SMCWAPS-G with Airlive upgrade.
Machine IP    192.168.1.2
Subnet Mask    255.255.255.0
Gateway    192.168.1.254
Host Name    WMU-6000FS
DHCP Mode    Auto Mode
MAC address    FF-FF-FF-FF-FF-FF
Wireless Status    Enable
Wireless Mode    Wireless Client mode, connect to [v2].
Devices    DISK:OK
USB1:Not Ready
USB2:Not Ready
Version    Version Number:R4.00c3 11/14

I want to connect (Ethernet to Ethernet) this unit to my XboX-1(not 360) so my XboX-1 will have wireless connection to my router. ATM I am using the SMC as AP client and my laptop can access it using wireless. My final idea is to use SMC as wireless NAS and wireless AP for the XboX-1 at the same time. Is this possible? have I made a wrong purchase for my purpose? Please advice.

//Dumpi

Here is the answer to my own Q:

1) set SMC to "Wireless Client mode"
2) put XboX, SMC and all other devices in the same IP range (192.168.1.nnn), netmask 255.255.255.0 ,GW 0.0.0.0
3) Make sure SMC shared Samba can be accessed by the laptop
4) Use a CROSS CONNECT Cable (CAT6) to connect SMC & XboX.
5) Make sure to setup shared drives on XboX.

That's all folks.