Help howto enable telnet penwrt?

negrito

Newbie

Offline

Posts: 7

Help howto enable telnet penwrt?

« on: March 17, 2008, 04:05:26 AM »

Openwrt Kamikaze x86 for WHD

I dropped the autobootfs file to the intern hdd of mine
SMC EZ Connect Storage SMCWAPS-G and reboot the device, so far everything
is working, but telnet. I understood that this is necessary in order to be able to install
packages, enable and configure the network settings "NVRAM" options. Correct me if I
am wrong. I have the Firmware OpenWrt Kamikaze - With X-Wrt Extensions r6760 Webif2
and Kernel Linux 2.4.36 password: aaaaa and IP: 192.168.2.1 Please help?

Many many thanks in advance,

Kind regards,
Negrito


	Logged

wetpaint

Newbie

Offline

Posts: 4

Re: Help howto enable telnet penwrt?

« Reply #1 on: March 17, 2008, 09:09:35 AM »

Hi negrito

With the autobootfs, SSH is enabled so you can use Putty, or any other SSH client to acccess the system, user name: root password: aaaaa

Using SSH is more secure than telnet.

The webif is a test and not functional.

I hope this helps.

BTW, for future reference, if you are posting regarding the SMCWAPS-G, then please post in macsat.com OpenWrt and ASUS WL Forum > SMC EZ Connect Storage (SMCWAPS-G), Micronica MGB100 Wi-Fi Hard Disk, Level One WAP-0007 and compatible > Firmware rather than the OpenWRT forum Wink

Regards

Dave


	Logged

negrito

Newbie

Offline

Posts: 7

Re: Help howto enable telnet penwrt?

« Reply #2 on: March 17, 2008, 17:07:02 PM »

Yes SSh is working!!!

Thanxxxx Dave Grin


	Logged

Pages: [1] Go Up

« previous next »

	Author	Topic: Help howto enable telnet penwrt? (Read 614 times)
0 Members and 1 Guest are viewing this topic.