|
Aqualung
|
 |
« Reply #420 on: August 17, 2008, 05:41:28 AM » |
|
does anyone know what kind of speed I can expect from a WMU-6500FS... i get a little over 4MB/s...there is no way that i know to speed it up :/ You get 4? Gosh, I barely get 2.7! What ticks me off reqlly badly is the USB transfer speed, which is worse than via network! |
|
|
|
|
Logged
|
|
|
|
|
Dynia
|
|
« Reply #421 on: August 22, 2008, 14:13:58 PM » |
|
Hello all,
my question should probably be addressed to Joker, but I would appreciate any opinion.
I`m not using the build-in WIFI card and I wonder about a possibiblity to replace it with mini-pci video card, for example the one on the attached picture. Is it possible to make it working?
Many thanks in advance.
|
|
|
|
Logged
|
|
|
|
|
Kael
|
|
« Reply #422 on: August 27, 2008, 09:35:20 AM » |
|
Hi all,
anyone knows if thats possible to install a teamspeak server on the device?
I've tried, but it seems some libs are missing, launching ts server with scripts tells it cant find linux_server, and after some googling, some told that it is due to missing libc files...
|
|
|
|
|
Logged
|
|
|
|
|
fedya
|
|
« Reply #423 on: August 27, 2008, 21:19:37 PM » |
|
hello, have tryed change firmware at wap-0008 to airlive 6500 under linux by tftp.
Firmware update takes about 7 seconds...
After reboot device become dead: don't work/boot, don't go to recovery/service mode.
Is any thing to try recover device at home or i need take it to service center?
|
|
|
|
|
Logged
|
|
|
|
|
macsat
|
|
« Reply #424 on: August 28, 2008, 07:17:37 AM » |
|
|
|
|
|
|
Logged
|
|
|
|
|
fedya
|
|
« Reply #425 on: August 28, 2008, 10:31:12 AM » |
|
Hello, i can't do following that recipe, because I alredy do that and after flashing by that method device become dead. Now step 5,6 cant't be done, because after "Press the two buttons at once and holding buttons" + "power on " device dont't go to cash/recovery mode. There only power led light on + network if lan plugged after turning on. After pressing power on shotdown led lights on for a half second too. I know that I press buttons right because i get recovery mode once  , now it don't work for this device. |
|
|
|
|
Logged
|
|
|
|
|
fedya
|
|
« Reply #426 on: August 28, 2008, 10:57:47 AM » |
|
Ps: there are 2 non-installed ports on MB:
10 pin marked as com 2 and 16 pin non marked - what is 16 pin connector?
|
|
|
|
|
Logged
|
|
|
|
|
fedya
|
|
« Reply #427 on: August 28, 2008, 11:03:20 AM » |
|
and 2 cents more:
as tftp flash process goes 7 seconds instead normal ~60 secs, may be root image/fs is corrupted?
What can i do in this situation?
Can i reach jtag with siemens x25-45 cable?
|
|
|
|
|
Logged
|
|
|
|
|
Dynia
|
|
« Reply #428 on: August 28, 2008, 15:53:14 PM » |
|
The forum seems to be less active these days... I`ve got no replies to my question regarding the possibility to install videocard in the mini-pci slot which is occupied by WiFi card. May be I was not very clear in my previous post, so I`m going to provide more details on what I wanted.
I`d like to know whether it is possible or not to incorporate the video driver for ATI Rage (or some other low-cost video-card that are avalable on the market) into the firmwire? I checked the sources of current firmware - it has only support of very few video drivers (and not of ATY Rage).
So I wonder if it is possible to update video drivers in the firmwire and would it at least theoretically work.
Any ideas?
Regards. Dynia.
|
|
|
|
|
Logged
|
|
|
|
|
ukez
|
|
« Reply #429 on: September 08, 2008, 03:33:27 AM » |
|
If you get that mini PCI graphics card working, what next usb mouse and keyboard support...?? That could be pretty cool.. keep us posted on the out come of your dream..lol  |
|
|
|
|
Logged
|
Is a member of the MGB111 syndicate
|
|
|
|
carlosgs
|
|
« Reply #430 on: September 11, 2008, 19:52:26 PM » |
|
I need help  I have bought a "Airlink 101 Airnas 350" (ANAS 350). First of all, I searched for "how to hack it" and access it linux to install apache... etc I installed the "Alternative Firmware for MGB111 compatible devices" and It worked. I could use the telnet, the web menu worked well, with new features... Everything worked well. I brought it to spain by plane, and, when I arrived, I installed a hard drive, but, when I turned it on, nothing appears on the LAN. I connect it to my PC (linux) and it is not able to obtain a IP address. I have tried to use the recovery mode, and I can TFTP .BIN files, but all of them last less than 10 seconds downloading  I have tried to: -Disconnect my HD -Tftp all the .BIN files that I have found, all the downloads last < 10 seconds Nothing works I have tried all to recover my Airnas, but I'm starting to think that I'm not going to be able of recovering it  Also, I cant find out what does "enable jtag" means... Thank you very much for your help. |
|
|
|
|
Logged
|
|
|
|
|
Dynia
|
|
« Reply #431 on: September 12, 2008, 06:39:52 AM » |
|
Hi Carlosgs,
Are you still able to enter the recovery mode? If yes, then I probably know how to help you. If not then you need to go to service probably.
Regards, Dynia.
|
|
|
|
|
Logged
|
|
|
|
|
carlosgs
|
|
« Reply #432 on: September 12, 2008, 07:56:23 AM » |
|
Yes, I can enter the recovery, I can see the "recovery mode" page in the browser.
The problem is that all the .bin uploads that I do trough tftp last less than 10 seconds :-(
Thanks
|
|
|
|
|
Logged
|
|
|
|
|
Dynia
|
|
« Reply #433 on: September 12, 2008, 08:22:11 AM » |
|
There is a guide for flashing the box with a firmwire with differend brand. http://forum.ixbt.com/topic.cgi?id=11:38294:79#79Unfortunatelly it is in Russian. May be you may use online translators, or I may tranlate it for you later. Please not that it is important to use -i argument when flashing. did you do so? And also I don`t understand how you could see the recovery mode in the browser - does that means that the box boots to linux to certain level? according to my knowledge the recovery mode could only be detected when the leds were flashing in some special pattern. regard, Dynia. |
|
|
|
« Last Edit: September 12, 2008, 08:23:52 AM by Dynia »
|
Logged
|
|
|
|
|
carlosgs
|
|
« Reply #434 on: September 12, 2008, 08:42:05 AM » |
|
Thank you
I'm going to see that page
I use linux, so the method for tftp is different.
I'm going to try with windows XP.
In my box, if you open 192.168.123.254 in the browser, and the recovery loader is on, you can see a red rectangle and it says "Recovery mode"
Also, the leds are flashing at the same time, very fast.
Thanks again, Carlosgs
|
|
|
|
|
Logged
|
|
|
|
|
