|
Kael
|
 |
« Reply #45 on: February 13, 2008, 19:23:44 PM » |
|
I'm here ;o) AMIT urrently uploads the full sources of the FW on my FTP... huge file about 280 Mb  I'll zip it and see how to put it online for you all to DL ;o) |
|
|
|
|
Logged
|
|
|
|
|
stylesuxx
|
|
« Reply #46 on: February 13, 2008, 19:56:51 PM » |
|
|
|
|
|
|
Logged
|
|
|
|
|
ciko
|
 |
« Reply #47 on: February 13, 2008, 21:04:44 PM » |
|
this can occur if some Windows client has a samba share mounted and does not disconnect automatically. Or did you enable UPnP autosearch?
Thank's for the hint schufti! Though I can surely tell that no samba client was active at the time of the happening i did not at all think of an automated procedure to update the upnp thing. I have disabled it and hope that the issue is gone now. It's great that there finally is some source for this thing. Though i think i won't be able to compile my own version I strongly hope that anyone of you will create a telnet-enabled version  Big thanks to all of you for your efforts greets Michael |
|
|
|
|
Logged
|
|
|
|
|
Kael
|
|
« Reply #48 on: February 13, 2008, 21:44:01 PM » |
|
F*** got a problem with my device, SMB seems to refuse to work, cannot access on the network and does not appear in the workgroup... dont understand...
|
|
|
|
|
Logged
|
|
|
|
|
Kael
|
|
« Reply #49 on: February 14, 2008, 11:26:41 AM » |
|
@ ciko :
Telnet enabled has allready been done wih older FW, probably will be too with new one ;o)
Hope my device will work this evening, i'll backup my datas and format the drive... maybe the SMB problem is due to some mess with the directories attributes and rights management... i dont think this is an hardware problem, what do you think about this Schufti?
Soon the device works, i'll check the uploaded source file, if all is ok, we can put it online.
Edit : Files checked, all is ok, i'll see with Stylesuxx to host it and to put a link here. I had to erase all datas on MGB and reset it fully to make it work again, now seems ok.
|
|
|
|
« Last Edit: February 15, 2008, 12:41:08 PM by Kael »
|
Logged
|
|
|
|
|
ukez
|
|
« Reply #50 on: February 16, 2008, 22:03:22 PM » |
|
Hiya i've just bought a MGB111. So ive got a few questions. 1)Whats the maximum capacity disk it will take? 2)Can anyone point out any major problems that i may encounter with this device? 3)What firmware should i ensure is on it before i start to fill my drive with files? 4)Can the AMIT MGB111 support multiple users logining in at the same time sharing different access rights? 5)Can i upload and download to this drive across a network? or are the uploads only by the USB option? 6)What file type do you recommend i stick to when formating this device? (NTFS, FAT32?) i may at some point use this with linux. 7)Whats this device like for streaming across the wireless option?  Is there any particular way i should set this up on my network to get the most benifits from it? 9)Does anyone have any screen shots of the menu? Id really appreciae any input any of you can post to me regarding the above, many thanks in advance!  Ezra |
|
|
|
« Last Edit: March 21, 2008, 03:58:16 AM by ukez »
|
Logged
|
Is a member of the MGB111 syndicate
|
|
|
|
Kael
|
|
« Reply #51 on: February 17, 2008, 09:48:28 AM » |
|
Hi ukez
About this device, you may encounter problems with download managers, stabilty, bug with firefox and size limitations, to fix all of theses and add functionality, you may update it with the FW described and linked a few posts before, but be sure your MGB111 is a PEARL PE4088 one, or it may not work .
Downloads and Uploads can be done at the same time via network, easily, dont have to use USB.
Users can log at the same time on the network.
The admin interface is easy but take some time to look at all options.
Read carefully the manual...
For your fat / ntfs question... well you dont have to do this, your driver will be totally formatted by the MGB111 as it uses ext3 filesystem, the MGB11 is a linux based device.
For the streaming, with the latest FW provided here, you can use upnp to stream medias accross your network.
I use the MGB111 as a Wireless router / access point, no problems, got many options for security.
As i allways say, Read the manual... especially if you don't know how to use, and how it works...
|
|
|
|
|
Logged
|
|
|
|
|
ukez
|
|
« Reply #52 on: February 17, 2008, 16:12:26 PM » |
|
Kael, many thanks for your input, much appreciated.
Hey, regarding the PEARL PE4088, is there any way in particular that i can identifiy if my one is compatible with the latest firmware when it arrives?
|
|
|
|
« Last Edit: February 17, 2008, 17:23:32 PM by ukez »
|
Logged
|
Is a member of the MGB111 syndicate
|
|
|
|
Kael
|
|
« Reply #53 on: February 17, 2008, 16:23:47 PM » |
|
hmm, you should see if thats an Airlive device or not... on the box or in the webadmin, due to the look and feel of the webpages.
|
|
|
|
|
Logged
|
|
|
|
|
ciko
|
|
« Reply #54 on: February 19, 2008, 22:32:42 PM » |
|
Edit : Files checked, all is ok, i'll see with Stylesuxx to host it and to put a link here. I had to erase all datas on MGB and reset it fully to make it work again, now seems ok.
As you know Kael managed to obtain the SourceCode from Amit. Here you can find all files provided by him if you are interested to modify your firmware: Best regards Michael Edit: According to Kael the files have to be extracted as root to prevent errors |
|
|
|
« Last Edit: February 19, 2008, 22:40:56 PM by ciko »
|
Logged
|
|
|
|
|
chimbo
|
|
« Reply #55 on: February 21, 2008, 16:21:17 PM » |
|
Hi, a modified (hopefully enhanced) bin file for the device can be found here http://style-o-design.rivido.de/mgb111/upgrade-r400b2.binWhat's new? autoexec script (on 1st hdd partition or usb) execution à la schufti printserver function more busybox options (commandline editing + tab expansion, dmesg, vi, free, ...) telnet have fun, chimbo |
|
|
|
|
Logged
|
|
|
|
|
buck08
|
|
« Reply #56 on: February 21, 2008, 20:27:27 PM » |
|
@chimbo Hi chimbo, what can I do now with the upgrade-r400b2.bin ?  Can I just load it up with the webinterface? I'm a little confused because the last FW update was something about 4MB and your update is just something around 220 KB.  Did someone already try to install this to the mgb-111?  cheers buck |
|
|
|
|
Logged
|
|
|
|
|
Kael
|
|
« Reply #57 on: February 21, 2008, 20:39:06 PM » |
|
I've tried the file, seems it does not work for me... the admin page to load it doesnt load anything, or maybe i've got a crash somewhere in my MGB111... the update procedure just give me "cannot load webpage"
|
|
|
|
|
Logged
|
|
|
|
|
chimbo
|
|
« Reply #58 on: February 22, 2008, 11:34:14 AM » |
|
I'm a little confused because the last FW update was something about 4MB and your update is just something around 220 KB. Looks like something went wrong with the download. Size should be 3.659.716 bytes. Just try it again and update with web interface. chimbo |
|
|
|
|
Logged
|
|
|
|
|
chimbo
|
|
« Reply #59 on: February 22, 2008, 18:12:48 PM » |
|
Hi, a modified (hopefully enhanced) bin file for the device can be found here http://style-o-design.rivido.de/mgb111/upgrade-r400b2.binWhat's new? autoexec script (on 1st hdd partition or usb) execution à la schufti printserver function more busybox options (commandline editing + tab expansion, dmesg, vi, free, ...) telnet have fun, chimbo Some people experienced loss of user configuration and user data on disk after installing this firmware. So be carefull and backup your user data and configuration if any before updating. chimbo |
|
|
|
|
Logged
|
|
|
|
|
