Finally, the box works

It has not accepted any firmware, none, either from linux or windows.

I runned the firmware update .exe provided by airlink101, and it detected the IP of the airlink.

I putted that IP in the windows firefox, and voila! I could acces my box again.
I updated to the custom firmware, just in case...

The problem is that my firefox in linux, when I input "AirNAS", it search in google for it, instead of searching for a device called "AirNAS"

Thank you very much for your help.

Also... I have a 2.5 IDE HD, from a mac laptop, and an adapter from 2.5 to 3.5 IDE.
I have tried to format it, but there are errors. I've tried to format it with my laptop, and there is no way.
It's formatted in the "HFS" mac filesystem.
Do you have any idea to format it?
It has 40 GB...
The other HDs that I have are < 5 GB :-/
I have tried the adapter with another 2.5 IDE, and it works with the box.

Thank you very much again

Hi goyoex,

Make sure that you completely unzip the image of the firmwire. Some files at JKR`s web site are zipped twice. So you need to verify the extension of your image before flashing that should be .bin (should not not be .zip or .tar or .bz)
 
I had the same issue before I realized above feature.

Hi,

if you were familiar with U, you would guess that the copy process wants to duplicate the access rights on the new (copied) file. BUT FAT32 doesn't support any (apart from r/o) access rights, so leading to the message that "chmod" (setting access rights) failed.... MC therefor gives you the option to skip (all), just to copy the files but skip the access rights.

schufti

Hi all,
I am not sure whether (and how often) anyone comes here, anyway, just in case...

I have finished a very simple packaging system for pre-built packages I am providing on my blog. Unfortunately it does not handle the inter-packaging dependencies, it just automates the download/install/remove process, but still I hope it could help with installation a bit. The usage is very simple and is described here in a detail.

Also I would like to announce that I finally found some time to build the deluge client version 1.0.5. It works like a charm on my box and I am going to provide a package with it. I believe I'll manage it till the end of the week.

Regards,
Filodej

Hello again,
as I announced, the package is uploaded and the post is written.

I hope you'll enjoy it.

Filodej

Well...

got open vpn installed and configured, did generate the key from another computer.
But i've got issues with the TUN interface:

openvpn logs give this:

/sbin/ip link set dev /dev/net/tun up mtu 1500
SIOCSIFMTU: No such device

i've got /dev/mtu and others 0 1 2 3
i've got /dev/net/mtu

Someone knows what is wrong?