macsat.com OpenWrt and ASUS WL Forum
January 08, 2009, 18:00:47 PM *
Welcome, Guest. Please login or register.
Did you miss your activation email?
Login with username, password and session length
News: Back to macsat.com
 
   Home   Help Search Login Register  
macsat.com OpenWrt and ASUS WL Forum > OpenWrt (White Russian) > OpenWRT > WDS ip-adresses
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: WDS ip-adresses  (Read 1929 times)
0 Members and 1 Guest are viewing this topic.
nsn
Newbie
*
Offline Offline

Posts: 46


View Profile
« on: October 08, 2007, 19:14:42 PM »
Hello,
I like to have WDS between 2 Asus devices. Also i want to be able to get in the 2 Asus devices because they both have a http service running. Can both WL500G get a reachable ip-adress in wds mode ? Please help me out here.. I can make a WDS connection but i want both AP's to be accesable from the WAN side. 

Thanks NSN
Logged
macsat
Administrator
Sr. Member
*****
Offline Offline

Posts: 1,104



View Profile
« Reply #1 on: October 09, 2007, 08:36:13 AM »

Even in WDS mode all devices have an ip.

That ip can be accessed.
Logged
nsn
Newbie
*
Offline Offline

Posts: 46


View Profile
« Reply #2 on: October 09, 2007, 11:55:10 AM »
Hello Macsat, thanks for your reply.
I can't get WDS working. I've a computer at 192.168.5.95, AP1: 192.168.5.2, AP2: 192.168.5.3
It's not possible to ping all the IP-adresses. See my nvram in attchments.
Please can you help me out here ?
* wds.zip (22.85 KB - downloaded 96 times.)
Logged
macsat
Administrator
Sr. Member
*****
Offline Offline

Posts: 1,104



View Profile
« Reply #3 on: October 09, 2007, 11:58:55 AM »

For WDS to work, you have to change wl0_wds in AP1 to be the MAC address of AP2, and in AP2 it has to be set to the MAC address of AP1.

Is this the way you have done it ?

Did you start by testing without encryption/security ?

macsat
Logged
nsn
Newbie
*
Offline Offline

Posts: 46


View Profile
« Reply #4 on: October 09, 2007, 12:49:51 PM »
As far as i can see i did it rigtht.. so filled in the MACadress of the other router:

AP1=> MAC=00:11:D8:56:53:13
wl0_wds   00:0E:A6:F0:48:0A

AP2=> MAC=00:0E:A6:F0:48:0A
wl0_wds 00:11:D8:56:53:13

Please have a look in the attached excelfile if i missed something

I've no security (WEP or something) enabled
« Last Edit: October 09, 2007, 12:51:29 PM by nsn » Logged
macsat
Administrator
Sr. Member
*****
Offline Offline

Posts: 1,104



View Profile
« Reply #5 on: October 09, 2007, 13:28:43 PM »

Seems to be correct.

Can you see any "talk" of WDS in the system log?
Logged
nsn
Newbie
*
Offline Offline

Posts: 46


View Profile
« Reply #6 on: October 09, 2007, 16:16:52 PM »
No when i do a logread i don't see any WDS talk. The strange thing is that client mode seems to work so why not wds ? What else can i do ?  I double checked the MAC adresses (ifconfig). Can i reload some packages ?
Logged
nsn
Newbie
*
Offline Offline

Posts: 46


View Profile
« Reply #7 on: October 12, 2007, 11:16:52 AM »
Hello ... can anyone help me out !

I switched from openwrt to DD-WRT (used the same WL500G). In this case WDS works fine. I need however to run openwrt. I cleared the nvram as descibed in the wiki for DD-WRT. After this i switched back to the openwrt. My nvram looks like:

wl0_frameburst=0
wan_device=vlan1
et0macaddr=00:11:D8:56:53:13
wl0_akm=none
watchdog=3000
boot_wait=on
wl0_infra=1
et0mdcport=0
pmon_ver=PMON 3.11.19.0
wl0_ifname=eth2
wl0_mode=ap
wl0_ap_isolate=0
os_flash_addr=bfc40000
wl0_gmode=1
boardtype=bcm94710dev
et1macaddr=00:11:D8:56:53:13
lan_dhcp_num=
lan_netmask=255.255.255.0
wl0_dtim=1
wl0_ssid=hcontrol3
et1mdcport=1
wl0_key1=***********  (This is replaced by *...NSN... Both AP's have same WEP key)
lan_dhcp_enabled=1
wl0_plcphdr=long
wl0_closed=0
wl0_macmode=disabled
wl0_lazywds=0
wl0_antdiv=3
wan_proto=none
wl0_txpwr=28
wl0_wds=00:60:B3:99:EB:08
wan_dhcp_num=
ntp_server=pool.ntp.org
lan_ifnames=eth0 eth2
lan_proto=static
lan_ipaddr=192.168.0.15
clkfreq=125
wl0_frag=2346
wl0_wep=enabled
sdram_config=0x0000
scratch=a0180000
lan_ifname=br0
sdram_refresh=0x8040
sdram_ncdl=0x00000000
hardware_version=WL500-02-04-02-40
wl0_rts=2347
wl0_key=1
et0phyaddr=30
wifi_dhcp_start=
wan_ifname=eth1
wifi_dhcp_num=
wifi_dhcp_lease=
wl0_radio=1
wl0_bcn=100
wan_dhcp_start=
lan_dhcp_start=
wl0_gmode_protection=1
wl0_maclist=
wan_dhcp_lease=
sdram_init=0x0419
lan_dhcp_lease=
dl_ram_addr=a0001000
regulation_domain=0X30DE
wl0_txdiv=3
wl0_channel=4
et1phyaddr=0
boardnum=asusX
wl0_crypto=tkip
Logged
nsn
Newbie
*
Offline Offline

Posts: 46


View Profile
« Reply #8 on: October 12, 2007, 14:05:00 PM »
Started all over following exactly the tutorial for installing openwrt.
But before i completely erased the nvram.
I can not get WDS working at openwrt. ....  Sad

.... who has it running on openwrt/webif.... ?
Logged
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to:  

English Steel 1.6 © Saxon North Technologies
Powered by MySQL Powered by PHP Powered by SMF 1.1.7 | SMF © 2006-2008, Simple Machines LLC
Joomla Bridge by JoomlaHacks.com 		Valid XHTML 1.0! Valid CSS!
Page created in 0.168 seconds with 25 queries.