Did anyone manage to compile any firmware with DLNA media support for the XBOX360 and PS3

The Qnap  TS-109 and TS-209 wireless storage drives both fully support it.

More info below:

http://www.olgn.net/archives/ps3-or-xbox-360-add-some-wireless-network-attached-dlna-storage

http://elinux.org/DLNA_Open_Source_Projects

http://www.linuxdevices.com/news/NS2381056192.html

ref: internet explorer and firefox.. i'll update to the latest image now..  thanks

Chimbo you seem to know allot about this drive..

Question, i know i tunes can see this drive as its a itunes server..  Would it be possible to make the xbox360 see it across the network?

Its probably impossible, but i thought id ask..... that would be cool if it could.

could this device support DLNA?

also Chimbo.. Why cant the mgb111 ftp be accessed via internet explorer?

I was just wondering if their was any particular reason why my hard drive doesnt slow down or stop when it isnt in use.  Shouldnt it go into standby mode or something until its accessed via the network.

Its constantly spinning and and my mgb111 housing is running fairly warm, a bit warmer than id like it to. 

Any Ideas?  Im using the latest firmware off here at the moment.. upgrade_b2_080307.bin

Thanks.... 

Hey kael, thanks for logging into my device for me the othe day...

Should i be uploading this new firmware now?


upgrade_b2_080307.bin.html 

Kael, did you get my email last night?

Just out of curiousity, what is the largest supported hard drive that this enclosure supports, does any body know please?

Ok heres what i did to re-flash it.

1. I switched on my MGB111 device

2. Activated the recovery loader by continously holding down the (Shutdown) & (Backup) switch on the MGB111 (this also defaults the device so to anyone else attempting this ensure your ip address on your pc is set to 192.168.123.xxx range).

3. Once the bottom 4 LED's continously flashed together really fast i opened the command prompt, by typing CMD and pushing the enter key in the run option on the start menu.

4. Once the command prompt was open i typed the following C:\>tftp -i 192.168.123.254 PUT C:\IMAGE.BIN, (C:\ being the location of my firmware file & Image.bin being the name of my file).

5. I then pushed enter and run the upload.

6. Then once the following displayed on my screen (Transfer successful: 3873531 bytes in 61 seconds, 63500 bytes/s) i switched off and on my device and that was the firmware update complete.

@Kael:

I tried the link that you posted but it doesnt work... worst luck.

Update:  If you can not get through to this link (http://stylesuxx.twoday.net/stories/4702831/) via firefox or internet explorer you may need to access the site via www.altavista.com website translater.  Thats the only way i can access that site, plus you can translate it to any language you prefer, in my case english.

He must have certain IP ranges barred from access for some reason.

I cant see all of the users ive created under the permission tab in the Access Control options. Can someone do a step by step guide on what i need to do to resolve this please..

Kael, many thanks for your input, much appreciated. 

Hey, regarding the PEARL PE4088, is there any way in particular that i can identifiy if my one is compatible with the latest firmware when it arrives?

Hiya i've just bought a MGB111.

So ive got a few questions.

1)Whats the maximum capacity disk it will take?
2)Can anyone point out any major problems that i may encounter with this device?
3)What firmware should i ensure is on it before i start to fill my drive with files?
4)Can the AMIT MGB111 support multiple users logining in at the same time sharing different access rights?
5)Can i upload and download to this drive across a network? or are the uploads only by the USB option?
6)What file type do you recommend i stick to when formating this device? (NTFS, FAT32?) i may at some point use this with linux.
7)Whats this device like for streaming across the wireless option?
Is there any particular way i should set this up on my network to get the most benifits from it?
9)Does anyone have any screen shots of the menu?

Id really appreciae any input any of you can post to me regarding the above, many thanks in advance!

Ezra