macsat.com OpenWrt and ASUS WL Forum

SMC EZ Connect Storage (SMCWAPS-G), Micronica MGB100 Wi-Fi Hard Disk, Level One WAP-0007 and compatible => Firmware => Topic started by: boomstick25 on June 18, 2008, 14:15:46 PM

Title: Is there a way to restore the SMC GUI / Firmware?
Post by: boomstick25 on June 18, 2008, 14:15:46 PM

After tinkering around with the SMCWAPS-G awhile back, I don't really have a need for it anymore. I was going to sell it, but I'd like to get the original SMC GUI / firmware back on the device. I tried just flashing it with SMC's firmware, but that didn't help.

Is there a method for doing this?

Thanks

Title: Re: Is there a way to restore the SMC GUI / Firmware?
Post by: schufti on June 18, 2008, 18:33:19 PM

Hi,

unfortunately my crystalball is in for service at the moment, so you have to be a bit more specific about your device and what you have done with/to it to alter it's pristine state....

if that seems too much trouble to you (and I might suggest the same solution after all), then just read the wiki about rebranding, rebrand to smc and you should be able to flas orig smc-fw again ....