• in some FW they messed up the mini-lpd, so it never starts. use schufti’s latest (MGB100_400S07.upg), it should work
• some printers won’t be detected. I was lucky with Canon and HP Inkjet but the HP ScannerPrinter was not detected....
• GDI printers will never work (they won’t work with most cheap -not bidirectional- printservers)

End of the story → Only PCL5 and PCL6 printer are Supported. After my Support request, they edit the Productsheet on www.level-one.de, but not on http://global.level1.com/.

This sucks!

Am 12.04.2007, 11:07 Uhr, schrieb Support2 support2@digital-data.de:

Sehr geehrter Hr. xxx, Ein Update der Firmware, sodass auch GDI Drucker unterstützt werden ist nicht möglich. In den Angaben auf unserer Internetseite ist hinterlegt, dass nur Drucker angebunden werden können, die über reines PCL5 oder PCL6 verfügen. Für weitere Fragen stehen wir Ihnen gerne zur Verfügung. For further questions please contact us. Mit freundlichem Gruß, best regards Ihr Level One Team<br> Your Level-One team<br> Tel.: 01805-991002<br> Fax : 01805-991001<br> E-Mail: Support@Level-One.de<br> Web: www.Level-One.de oder www.Level-One.net<br> - Bitte fügen Sie einer Antwort immer den gesamten Schriftverkehr bei!<br> - Please always attach all previous mails!<br>

FW c03 and S07 work winth Xerox Phaser 3117

If status frame " http://192.168.xxx.xxx:2005/more.htm?&RC=@&ZT=...” indicate:

1. Printer Model Name:Xerox Corporation Xerox Phaser 3117(Full speed)
2. Printer Queue Name:lpusb0
3. Status:Ready

You can configure Xerox Phaser 3117:

setting the Xerox Phaser 3117 Printer in Suse 10.3 can be done editing the printers.conf:

1. # Printer configuration file for CUPS v1.2.12
2. # Written by cupsd on 2008-02-05 00:36
3. # Replace 192.168.xxx.xxx with your wireless file server IP address
4. <DefaultPrinter lpusb0>
5. Info Samsung ML-1710, 1.0
6. Location 192.168.xxx.xxx
7. DeviceURI lpd://192.168.xxx.xxx/lpusb0
8. State Idle
9. StateTime 1202163805
10. Accepting Yes
11. Shared No
12. JobSheets none none
13. QuotaPeriod 0
14. PageLimit 0
15. KLimit 0
16. OpPolicy default
17. ErrorPolicy stop-printer
18. </Printer>

setting the Xerox Phaser 3117 Printer in Windows 2K/XP(NT based):

Windows 2000 and XP (NT based) have built-in LPR client, users could utilize this feature to Print. You have to install your Printer Driver on LPT1 or other ports (Standard TCP/IP port):

1. Open Printers and Faxs.
2. Select “Ports” page, Click “Add Port…”
3. Select “Standard TCP/IP Port”, and then click “New Port…”
4. Click Next and then provide the following information :
5. Type address of server providing LPD that is our NAT device: 192.168.xxx.xxx (replace 192.168.xxx.xxx with your wireless file server IP address)
6. Select Custom, then click “Settings…”
7. Select “LPR”, type ” lp“ lowercase letter in “Queue Name:”
8. Enable “LPR Byte Counting Enabled”.
9. Apply your settings: click “Finish” Button