== there generally seem to be three issues with the printer server: ==

  * in some FW they messed up the mini-lpd, so it never starts. use schufti's latest (MGB100_400S07.upg), it should work
  * some printers won't be detected. I was lucky with Canon and HP Inkjet but the HP ScannerPrinter was not detected....
  * GDI printers will never work (they won't work with most cheap -not bidirectional- printservers)


== Support Mail from Level One. ==

End of the story -> Only PCL5 and PCL6 printer are Supported.
After my Support request, they edit the Productsheet on www.level-one.de,
but not on http://global.level1.com/.

This sucks!


Am 12.04.2007, 11:07 Uhr, schrieb Support2 <support2@digital-data.de>:
 
> Sehr geehrter Hr. xxx,
>  
> Ein Update der Firmware, sodass auch GDI Drucker unterstützt werden 
> ist nicht möglich.
> In den Angaben auf unserer Internetseite ist hinterlegt, dass nur 
> Drucker angebunden werden können, die über reines PCL5 oder PCL6 
> verfügen.
>  
>  
> Für weitere Fragen stehen wir Ihnen gerne zur Verfügung.
>  
> For further questions  please contact us.
>  
> Mit freundlichem Gruß,
> 
> best regards
> 
>  
> Ihr Level One Team<br>
>
> Your Level-One team<br>
> 
> Tel.: 01805-991002<br>
>  
> Fax : 01805-991001<br>
>  
> E-Mail: Support@Level-One.de<br>
>  
> Web: www.Level-One.de oder www.Level-One.net<br>
>  
> - Bitte fügen Sie einer Antwort immer den gesamten Schriftverkehr bei!<br>
>  
> - Please always attach all previous mails!<br>

== Configure the printer server with Xerox Phaser 3117 Printer ==

__FW c03 and S07 work winth Xerox Phaser 3117__

If status frame " http://192.168.xxx.xxx:2005/more.htm?&RC=@&ZT=..." indicate:
  -   Printer Model Name:Xerox Corporation Xerox Phaser 3117(Full speed)
  -   Printer Queue Name:lpusb0
  -   Status:Ready

__**You can configure Xerox Phaser 3117:**__

**setting the Xerox Phaser 3117 Printer in Suse 10.3 can be done editing the printers.conf:**

  -   # Printer configuration file for CUPS v1.2.12
  -   # Written by cupsd on 2008-02-05 00:36
  -   # Replace 192.168.xxx.xxx with your wireless file server IP address
  -   <DefaultPrinter lpusb0>
  -   Info Samsung ML-1710, 1.0
  -   Location 192.168.xxx.xxx
  -   DeviceURI lpd://192.168.xxx.xxx/lpusb0
  -   State Idle
  -   StateTime 1202163805
  -   Accepting Yes
  -   Shared No
  -   JobSheets none none
  -   QuotaPeriod 0
  -   PageLimit 0
  -   KLimit 0
  -   OpPolicy default
  -   ErrorPolicy stop-printer
  -   </Printer>

**setting the Xerox Phaser 3117 Printer in Windows 2K/XP(NT based):**


Windows 2000 and XP (NT based) have built-in LPR client, users could utilize this feature to Print. 
You have to install your Printer Driver on LPT1 or other ports 
(Standard TCP/IP port):
  -   Open Printers and Faxs. 
  -   Select “Ports” page, Click “Add Port…”     
  -   Select “Standard TCP/IP Port”, and then click “New Port…” 
  -   Click Next and then provide the following information : 
  -   Type address of server providing LPD that is our NAT device:   192.168.xxx.xxx (replace 192.168.xxx.xxx with your wireless file server IP address)
  -   Select Custom, then click “Settings…” 
  -   Select “LPR”, type ” lp“ lowercase letter in “Queue Name:” 
  -   Enable “LPR Byte Counting Enabled”. 
  -   Apply your settings: click "Finish" Button