In the Forum, the user Aladinsane gave this explanation on getting Pagano’s V4 Upgrade with his OpenWrt Kamikaze image working in client mode :

I had some trouble figuring that out as well. Here is what I’ve done. I disabled the dnsmasq, asked udhcpd to listen on the bridged device br0 and added the router as new name server.

Extract from /etc/init.d/rcS of the changes I made to get my SMCWAPS to connect to my wireless router (I have left out the stuff irrelevant to this problem, so I haven’t deleted anything except from the line that starts the dnsmasq-daemon:

cp /etc/RT2500STA.dat /tmp/

insmod rt2500sta

ifconfig wl0 0.0.0.0 up &

ifconfig eth1 0.0.0.0 &

ifconfig lo 127.0.0.1 up

/etc/init.d/dropbear start &

#

# Bridge Network

#

brctl addbr br0

brctl addif br0 eth1

brctl addif br0 wl0

ifconfig eth1 0.0.0.0

ifconfig wl0 0.0.0.0

ifconfig br0 0.0.0.0 up

#Added in order to obtain an ip-address from the router /sbin/udhcpc -i br0

#Modified to point at my router’s ip-adress echo nameserver 192.168.1.1 > /etc/resolv.conf

#

# Init Scripts

#

mount /dev/hda1 /mnt/hda1 &

mount /dev/sda1 /mnt/sda1 &

#Delete in order for the device not to broadcast ip-addresses

#/etc/init.d/dnsmasq start &

/etc/init.d/samba start &

/etc/init.d/vsftpd start &

/etc/init.d/nfsd start &

/etc/init.d/lighttpd start -f /etc/lighttpd.conf &

hdparm -S12 /dev/hda &

/Aladinsane