DocumentsDate added

HDD / USB Filesystem for V3 hot!

15.02.2007

Complete USB Filesystem (userspace linux ) for the V3 upgrade.

This is a complete image that can be placed on the harddrive, and will enable:
- vsftpd ftp server
- SAMBA Server  (windows shared drive)
- ctorrent - excellent console based Bittorrent client
- More up2date and complete busybox.

Simply untar/gzip to the root of the internal disk, or USB drive / Memory device, and let the device boot in the Upgrade v3 version of the firmware, and it will automaticly chroot to the drive, and let you use this more complete userspace linux.

Hits: 1010

• Details
• Download

Firmware Upgrade V3hot!

15.02.2007

This firmware upgrade image fixes some issues with the previos versions.

If a file called autoexec is placed in the root of the disk ( /mnt/autoexec ) it will be run a boot time. This means that if one should wish so, a complete linux can be placed on the disk, and the autoexec file can be used to chroot to it. This completely opens the routers, and as the CPU is running i486 emulation, most x86 applications can be run here !

Changes:
 - Test SDA1/autoexec and after HDA1/autoexec (you can restore a bad HD filesystem with USB one)
- AT-Keyboard lag in syslogd out.
- FTP server ok.
- chmod -R 777 down.
- mkswap & swapon/off. loop & losetup. iwtools included.

For the Techies amoungst you, this is what has been changed:

CHANGES from original MFB100
**************************************
File: ./rom_disk/bak.etc/rc.d/rc.bridge
======================================
#!/bin/ash
PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin
echo 'set path'
#--- begin changes ----------------
mount /dev/sda1 /mnt
if [ -f /mnt/autoexec ];then
       /mnt/autoexec
       exit
   else
       echo "USB /mnt/autoexec not found"
       umount /mnt
   fi ;
mount /dev/hda1 /mnt
if [ -f /mnt/autoexec ];then
       /mnt/autoexec
       exit
   else
       echo "HDA1 /mnt/autoexec not found"
       umount /mnt
   fi ;
#---end changes ----------------
mkdir /var/log
.
.
.
route add -net 224.0.0.0 netmask 240.0.0.0 dev br0
#---- begin changes ---------------
telnetd &
chmod ugo-w /share &
#-----end changes --------------
exit
**************************************

File: ./usr_src/amit_bin/hotplug.sh
Files created from telnet-root are only readable for shares.
======================================
#!/bin/ash
case $1 in
.
.
.
               fi
            fi
         done
         SDR=/dev/$i
         mount -t ext2 $SDR $DIR/$DEV$Disk
         if [ "$?" = "0" ];then
- # comment--->   #chmod -R 777 $DIR/$DEV$Disk
            if [ -d "$DIR2" -a "$DEV" = "USB_" ];then
               mount -o bind $DIR/$DEV$Disk $DIR2/$DEV$Disk
            fi
            rec="$rec $i $DEV$Disk"
.
.
.

 

Hits: 668

• Details
• Download